How Plumbers Unclog Drains

Clogged drains are a common issue that happens to everyone. At some point, chances are you’ll find yourself searching the internet to find out how to unclog a clogged sink or toilet. Here at Aquatek plumbers, we send many local plumbers to fix this problem on a daily basis.

When your sink or plumbing suddenly freezes, your first instinct might be to use chemicals to unblock a drainpipe. After all, many ads promote all sorts of drain cleaners. Sadly, the solution for clogged drains is often a difficult process that most people can’t handle by themselves.

If you want to know more about this process, here is how plumbers unclog drains.

Cleaning the pipes

First, an expert will always look for the simplest solution. So, a plumber finds the u-shaped tube under the sink (also known as a trap). With the help of a basin beneath it, a plumber creates some space. Next, he or she uses a wrench to loosen the bolts of the tube. After loosening them, the trap comes off.

Removing the trap allows us to flip it over. If necessary, we use a pipe cleaner to remove any dirt, grease, or hair that may be trapped in there. After cleaning the inside of the trap, reinstallation follows. If that does not work, then you might see local plumbers reaching for an industrial pipe cleaner.

This flexible rod can extend for several meters. Usually, three to five meters depending on the piping system. With it, the internal cleaning of the pipes happens after we made some tests. The goal of using this professional tool is to remove any dirt, oil, grease, mill scales, or sediments that may be clogging the system.

 

Problems that only local plumbers can fix

Sometimes, a clogged drain is just a symptom of a larger issue. If the clogging still remains after the use of an industrial pipe cleaner, then the expert will resort to more useful tools. For example, a specialist may use a plumber’s snake.

Like the industrial pipe cleaning, a plumber’s snake is a flexible rod. But it comes with a crank on the other end. The plumber will use this tool to drill and remove any block. In detail, this is a long cable that is made up of numerous wires. When ready, it is lowered into the exhaust pipe. The plumber snake is pushed until the block is reached. Then, the plumber operates the tool until the block is no more.

If the blockage is too severe, the plumber may decide to use an electrically powered plumbing snake. Its engine reduces the clogging to small pieces that can easily slide down the drain.

 

If anything doesn’t work

If the plumber is unable to unblock the drain using the plumber’s snake, the hydro-jetter may be a last resort. The hydro-jetter consists of a nozzle fixed on a pressure washer. The hydrojetter is lowered into the drain until the block is reached, and the pressurized water is allowed to flow.

Other tools and techniques are available too. On balance, this is how a professional handles the clogged drains for quick results. Local plumbers in your area may have their style and preferences, but we mostly use these techniques first.

Leave a Reply

Your email address will not be published. Required fields are marked *